I’ll let the video tell you…. Train driver Matt is on hand to try one of his new 18″ work emotion D9r with a decent sized barrel which mathematically it’s very possible it will go on…. Soarer 1jz – Do ISF disc/LS400 fit under 18s? – Soarer Modifications & How-To vlog Just a short one […]
Stem seal discussions should come with a warning! People banter the term around and it always seems to pop up when talking about a touch of blue smoke from your exhaust. Is it turbos? Is it stem seals? Panic! Well… I’ve had both now. 18months ago after a night of hard driving on and off […]
Sean: So this is two driftdays put into one video, testing out all the new stuff I fitted. First drifts for ages!!! so this is two driftdays put into one video, testing out all the new stuff I fitted.
Sean: So I decided to upgrade my old hsd coilovers. Make sure you drop blackwing garage a msg if your interested in this setup. Installing BC coilovers to my 350z So I decided to upgrade my old hsd coilovers. Make sure you drop blackwing garage a msg if your interested in this setup. And also […]
While stripping my engine I discovered the Auxilliary belt tensioner pulley on my 1jz was on the way out, the bearing was totally gritting and noisy. So here’s a quick how to change the bearing if yours is doing the same. NOTE: Use a bigger socket as you can see in the video for refitting, […]
Here is the first of three engine based videos – this one we strip down the engine ready to do more work – stem seals replacement and cam belt and water pump. So if you are nervous about doing the work on your 1jz Toyota Soarer then take a watch. It’s worth noting that you […]
So I’ve done it, ish. The brakes are now on. The wheels are now on. The car is back together as I tested the PCV valve to see if it was dead and causing my blue smoke – it’s fine so it’s looking like Stem seals. Here’s a little vlog update, second instalment to come: […]
Sean: The final part of my custom centre console build. custom gauges 350z The final part of my custom centre console build.
Sean: I wanted to fit more gauges into the dash and figured the best way would be to modify the standard centre console. 350z custom dash build I wanted to fit more gauges into the dash and figured the best way would be to modify the standard centre console.
Sean: We made a short video of yesterdays very snowy rockingham driftday, make sure you check out our website and Instagram for more content. https://www.youtube.com/watch?v=kGroeJUWotg